info@biomedres.us   +1 (720) 414-3554
  One Westbrook Corporate Center, Suite 300, Westchester, IL 60154, USA

Biomedical Journal of Scientific & Technical Research

October, 2019, Volume 21, 4, pp 16101-16102

Short Communication

Short Communication

Architectural Insight into A.I based Inhaler System for Respiratory Precision

Sadique Shaikh1*, Shaikh Tarique Aziz2 and Minaz Khan3

Author Affiliations

1ISTM, India

2R.D Memorial Medical College, India

3Ashwi Medical College, India

Received: September 26, 2019 | Published: October 03, 2019

Corresponding author: Sadique Shaikh, ISTM, Mumbai, M.S, India

DOI: 10.26717/BJSTR.2019.21.003646

Abstract

Present piece of idea exhibits to divert attention towards automated high precision Life Support System (LSS) instead of manual one using medical intelligence devices while treating and diagnosis to the patient, where Ventilator, inhaler and respiratory control is most important factor during operation, surgeries and in other likewise medical emergency situations to maintain proper saturation in patient lungs to sustain their lives. This work gives idea, how we can design A.I based Inhaler System for the same.

Keywords: A.I based Inhaler System; A.I based Life-Support System; Medical Robotics; Surgical Robots

Modeling

The below model depicted the successful engineering how one can design and implement A.I based Inhaler System for Respiratory precision to maintain saturation of human breathing system, we can even labeled the system as Artificial Intelligence based lungs or Lungs Support System or Oxygen Support System or Breath Support System but purpose remains same. Patient respiratory sensed and input parameters send to Saturation Measurement Unit which must be highly calibrated and compare Measured saturation with Standard Saturation to find deviation for error detection and correction from where physical quantity fed to A.I based processing & controlling chamber with time control for inhalation decision support with all expert analysis and diagnosis which generate electronic respiratory report with necessary timing, processing and control signals to get follow further send to A.I based Inhaler System to decide and fixed precision parameters for respiratory. This report A.I based processing and control chamber generate on the basis of actual saturation and required saturation facts and figures further passed to Respiratory Correction for Proper Saturation Unit which is cascaded with Oxygen Level Supplier and Maintainer and work integrated. Finally stable inhalation feedback to patient for life survival in critical condition (Figure 1) [1-6].

Figure 1:

Conclusion

This piece of research gives you idea, how to engineer and implement precise artificial Intelligence based Inhaler System which is one of the most promising, needful and social welfare requirement to save patients’ lives with excellent Life Support System (LSS).

References

Short Communication

Architectural Insight into A.I based Inhaler System for Respiratory Precision

Sadique Shaikh1*, Shaikh Tarique Aziz2 and Minaz Khan3

Author Affiliations

1ISTM, India

2R.D Memorial Medical College, India

3Ashwi Medical College, India

Received: September 26, 2019 | Published: October 03, 2019

Corresponding author: Sadique Shaikh, ISTM, Mumbai, M.S, India

DOI: 10.26717/BJSTR.2019.21.003646

Abstract

Present piece of idea exhibits to divert attention towards automated high precision Life Support System (LSS) instead of manual one using medical intelligence devices while treating and diagnosis to the patient, where Ventilator, inhaler and respiratory control is most important factor during operation, surgeries and in other likewise medical emergency situations to maintain proper saturation in patient lungs to sustain their lives. This work gives idea, how we can design A.I based Inhaler System for the same.

Keywords: A.I based Inhaler System; A.I based Life-Support System; Medical Robotics; Surgical Robots